Effect of Different Dental Implants’ Materials on Stresses Generated Around Implant-Supported Overdenture: A Validated 3D Finite Element Analysis

Photoelastic Stress Analysis for Mandibular Implant Supported Overdenture with Two Types of Denture Base Materials: A Comparative in vitro Study

STRAIN EVALUATION OF PEEK CANTILEVER BARS AROUND IMPLANTS ASSISTED MANDIBULAR OVERDENTURES (IN VITRO STUDY)

Evaluation of Stress Distribution in Implant Retained Fixed Prostheses Fabricated from Polyetheretherketone (PEEK) and Zirconia by CAD/CAM Technology (An in-Vitro Study)

Comparative Stress Analysis Study Of CAD/CAM Milled PEEK And Zirconia Primary Copings In Double Crown PEEK Framework Mandibular Partial Denture After 1 Year Simulated Function

Comparative stress analysis of BioHPP and PEKK CAD/CAM frameworks in mandibular All-on-Four fixed-detachable prosthesis on its supporting implants

Three Dimensional Finite Element Analysis of Stresses Induced Around Inclined Implants with Different Framework Materials in Maxillary Complete Arch Prostheses (All on 4)

ANALYSIS FOR THE EFFECT OF IMPLANT POSITION AND DENTURE BASE MATERIALS ON STRESS DISTRIBUTION IN SINGLE IMPLANT SUPPORTED MANDIBULAR OVERDENTURE (3D FINITE ELEMENT STUDY)

Effect of Zirconia, PEEK, and CFR-PEEK frameworks versus Titanium on stress distribution of All-on-four implant mandibular restorations. A 3D Finite element analysis.

Influence of design and material on load bearing capacity of fixed dental prosthesis ; A finite element analysis