3D Evaluation of Marginal Fit of Interim Crowns Fabricated using Conventional, Virtual and Three-Dimensional Printed Working Dies. (In Vitro Study).

Fracture Resistance of Implant Supported Three Units Fixed Partial Dentures Fabricated from Zirconia and PEEK “In-vitro study”

Comparing Accuracy Of Surgical Guides Fabricated By Additive Method (3D Printing) Versus Subtractive Method (Milling by CAD/CAM) for Prosthetically Driven Implant Placement “An I

Evaluation of Marginal Accuracy of PEEK Vs. Lithium Disilicate Single Crowns Constructed By Two Fabrication Techniques: CAD/CAM And Heat Press (In-Vitro Study)

Effect of Fabrication Technique and Margin Design on the Marginal Fit of Interim Fixed Dental Prosthesis (An In-Vitro Study)

Color Stability of Three Different Types of Monolithic CAD/CAM Esthetic Restorations After Exposure to Artificial Accelerated Aging (An In-vitro study)

Accuracy of Surgical Guides Fabricated Using Two Different 3D Printers for Prosthetically Driven Implant Surgery “An in-Vitro Study”

Evaluation of the Efficacy of Different Surface Treatments on the Fracture Resistance of Endocrown Fabricated Using PEEK Material (An in vitro study)

The Effect of Nano-silica coating on Micro-Shear Bond Strength of CAD/CAM PEEK to Resin Cement: (An In Vitro Study)

Effect of Connector Designs on Flexural Strength of Gradient Versus Translucent Monolithic Zirconia Fixed Dental prosthesis, An in Vitro Study.