Effect of Digital Blocking of Reversed Tapered Preparations in Comparison to Conventional Wax Blocking on Fracture Resistance of Monolithic Zirconia Crowns .

3D Evaluation of Marginal Fit of Interim Crowns Fabricated using Conventional, Virtual and Three-Dimensional Printed Working Dies. (In Vitro Study).

Effect of Connector Designs on Flexural Strength of Gradient Versus Translucent Monolithic Zirconia Fixed Dental prosthesis, An in Vitro Study.

Evaluation of Fracture Strength and Surface Topography of Interim Prosthodontics Fabricated Using 3D Printing Compared to CAD/CAM Systems (In-Vitro Study)

Effect of Fabrication Technique and Margin Design on the Marginal Fit of Interim Fixed Dental Prosthesis (An In-Vitro Study)

Impact of Access Cavity Design and Root Canal Taper on Fracture Strength of Endodontically Treated Mandibular Premolars (An In-Vitro Study)

Evaluation of Marginal Accuracy of PEEK Vs. Lithium Disilicate Single Crowns Constructed By Two Fabrication Techniques: CAD/CAM And Heat Press (In-Vitro Study)

Color Stability of Three Different Types of Monolithic CAD/CAM Esthetic Restorations After Exposure to Artificial Accelerated Aging (An In-vitro study)

Effect of Cyclic Loading on The Fracture Resistance of Bilayered 3Y-TZP and Monolithic Gradient 5Y-TZP/3Y-TZP Zirconia Based Fixed Partial Denture. (In-Vitro Study)

Fracture Resistance of Implant Supported Three Units Fixed Partial Dentures Fabricated from Zirconia and PEEK “In-vitro study”