COMPARISON OF THE FRACTURE RESISTANCE BETWEEN INLAY RETAINED FIXED PARTIAL DENTURES FABRICATED FROM MILLED PEEK (BIOHPP) AND MONOLITHIC ZIRCONIA (In vitro study)

Fracture Resistance of Implant Supported Three Units Fixed Partial Dentures Fabricated from Zirconia and PEEK “In-vitro study”

Effect of Zirconia, PEEK, and CFR-PEEK frameworks versus Titanium on stress distribution of All-on-four implant mandibular restorations. A 3D Finite element analysis.

Evaluation of Stress Distribution in Implant Retained Fixed Prostheses Fabricated from Polyetheretherketone (PEEK) and Zirconia by CAD/CAM Technology (An in-Vitro Study)

STRAIN EVALUATION OF PEEK CANTILEVER BARS AROUND IMPLANTS ASSISTED MANDIBULAR OVERDENTURES (IN VITRO STUDY)

COMPARATIVE EVALUATION OF OSSEODENSIFICATION EFFECT ON PERI-IMPLANT STRAIN WHILE LOADING A FOUR UNIT CERAMIC FIXED PARTIAL DENTURE (IN VITRO STUDY)

Comparative Stress Analysis Study Of CAD/CAM Milled PEEK And Zirconia Primary Copings In Double Crown PEEK Framework Mandibular Partial Denture After 1 Year Simulated Function

Comparing changes of retention between milled zirconia and Polyetheretherketon (PEEK) framework on telescopic implant retained overdenture: An invitro study

ComparsionBetween All Zicronia, All PEEK and Zirconia-Peek Telescopic Attachments for Two Implants Retained Mandibular Complete Overdentures. In-Vitro Stress Analysis Study

Comparative stress analysis of BioHPP and PEKK CAD/CAM frameworks in mandibular All-on-Four fixed-detachable prosthesis on its supporting implants