Evaluation of Vertical Marginal Fit of Tooth Supported Provisional Dental Prosthesis Fabricated by Three Dimensional Printing Compared to CAD/CAM Milling System. (In Vitro Study) - Egyptian Knowledge Bank

245558

Evaluation of Vertical Marginal Fit of Tooth Supported Provisional Dental Prosthesis Fabricated by Three Dimensional Printing Compared to CAD/CAM Milling System. (In Vitro Study)

Article

Last updated: 28 Dec 2024

Overview Similar Items

Article

Evaluation of Internal Fit and Marginal Adaptation of 3D printed Versus CAD/CAM milled provisional anterior crowns (In-Vitro Study)

Article

EFFICACY OF BUILD DIRECTION OF 3D PRINTING FULL COVERAGE PROVISIONAL RESTORATION ON THE MARGINAL INTEGRITY (AN IN-VITRO STUDY)

Article

Evaluation of Marginal and Internal Fit of Provisional Restoration Fabricated by Two Different Scanning Techniques

Article

MARGINAL AND INTERNAL FIT EVALUATION OF CAD/CAM ZIRCONIA CROWNS FABRICATED BY STONE DIES VERSUS 3D PRINTED DIES

Article

Effect of Two Fabrication Techniques (CAD/CAM and 3D Printing) on The Internal Fit, Marginal Adaptation and Fracture Resistance of Multiple Fused Provisional Restorations: An In-

Article

Accuracy of teeth supported 3D printed versus CAD/CAM milled surgical guides used for dental implant placement (In-vitro study)

Article

3D Evaluation of Marginal Fit of Interim Crowns Fabricated using Conventional, Virtual and Three-Dimensional Printed Working Dies. (In Vitro Study).

Article

MARGINAL FIT ASSESSMENT OF CAD/CAM ZIRCONIA CROWNS FABRICATED BY DIGITAL SCANNING OF DIES AND SILICONE IMPRESSION (IN VITRO STUDY)

Article

Marginal and internal fit evaluation of metal copings fabricated by selective laser sintering and CAD/CAM milling techniques: in-vitro study

Article

Marginal Fit of PMMA CAD/CAM Crowns Fabricated by using Photogrammetry Scanning method. (an invitro study)