Internal fit and marginal adaptation of CAD/CAM lithium disilicate endocrowns fabricated with conventional impression and digital scanning protocols. An in-vitro study

Marginal Fit of PMMA CAD/CAM Crowns Fabricated by using Photogrammetry Scanning method. (an invitro study)

MARGINAL FIT ASSESSMENT OF CAD/CAM ZIRCONIA CROWNS FABRICATED BY DIGITAL SCANNING OF DIES AND SILICONE IMPRESSION (IN VITRO STUDY)

Marginal and internal gaps evaluation of endocrown restoration fabricated of different CAD/CAM materials using CBCT: An In vitro study

Evaluation of Internal Fit and Marginal Adaptation of 3D printed Versus CAD/CAM milled provisional anterior crowns (In-Vitro Study)

In Vitro Evaluation of The Marginal Adaptation of Monolithic Ceramic Crowns Fabricated with Different Margin Designs Using Novel CAD/CAM Material After Thermomechanical Aging.

MARGINAL ACCURACY AND INTERNAL FIT OF ENDOCROWN CONSTRUCTED FROM LITHIUM DISILICATE CERAMICS VERSUS POLY ETHER ETHER KETONE (PEEK) (AN IN VITRO STUDY)

assessment of marginal gap and fracture resistance of emax and tessera anterior endocrown (an invitro study )

MARGINAL AND INTERNAL FIT EVALUATION OF CAD/CAM ZIRCONIA CROWNS FABRICATED BY STONE DIES VERSUS 3D PRINTED DIES

Comparison of Marginal and Internal Fit of Copings Fabricated from Polyetheretherketone and Zirconia: An in-vitro study