MARGINAL AND INTERNAL FIT EVALUATION OF CAD/CAM ZIRCONIA CROWNS FABRICATED BY STONE DIES VERSUS 3D PRINTED DIES

Marginal Fit of PMMA CAD/CAM Crowns Fabricated by using Photogrammetry Scanning method. (an invitro study)

Internal fit and marginal adaptation of CAD/CAM lithium disilicate endocrowns fabricated with conventional impression and digital scanning protocols. An in-vitro study

Evaluation of Internal Fit and Marginal Adaptation of 3D printed Versus CAD/CAM milled provisional anterior crowns (In-Vitro Study)

Marginal and internal fit evaluation of metal copings fabricated by selective laser sintering and CAD/CAM milling techniques: in-vitro study

Marginal adaptation related to margin design of CAD/CAM ceramic crowns

Marginal Integrity of Different CAD/CAM Monolithic Ceramic Crowns with Vertical and Horizontal Finish Line Preparations

THE IMPACT OF A HIGH MAGNIFICATION APPROACH FOR TEETH PREPARATIONS ON THE MARGINAL FIT OF CAD/CAM MONOLITHIC LITHIUM DISILICATE CROWNS (IN VITRO STUDY)

ASSESSMENT OF INTERNNAL ADAPTATION OF CAD CAM ALL CERAMIC CROWNS WITH TWO DIFFERENT MARGIN DESIGNS

MARGINAL PENETRATION IN ZIRCONIA INALY-RETAINED FIXED PARTIAL DENTURES: AN IN-VITRO STUDY