Surface Roughness and Bacterial Colonization Of Two Types Of Zirconia (Cubic And Gradient) After Accelerated Hydrothermal Aging. (Comparative In-Vitro Study)

Biofilm adhesion and surface roughness of PEEK VS Monolithic Zirconium: Comparative “An In-Vitro Study”

Effect of Cyclic Loading on The Fracture Resistance of Bilayered 3Y-TZP and Monolithic Gradient 5Y-TZP/3Y-TZP Zirconia Based Fixed Partial Denture. (In-Vitro Study)

Evaluation of Fracture Strength and Surface Topography of Interim Prosthodontics Fabricated Using 3D Printing Compared to CAD/CAM Systems (In-Vitro Study)

Effect of Connector Designs on Flexural Strength of Gradient Versus Translucent Monolithic Zirconia Fixed Dental prosthesis, An in Vitro Study.

The Effect of Nano-silica coating on Micro-Shear Bond Strength of CAD/CAM PEEK to Resin Cement: (An In Vitro Study)

Fracture Resistance of Implant Supported Three Units Fixed Partial Dentures Fabricated from Zirconia and PEEK “In-vitro study”

Evaluation of Marginal Accuracy of PEEK Vs. Lithium Disilicate Single Crowns Constructed By Two Fabrication Techniques: CAD/CAM And Heat Press (In-Vitro Study)

Evaluation of the Efficacy of Different Surface Treatments on the Fracture Resistance of Endocrown Fabricated Using PEEK Material (An in vitro study)

Effect of two Blocking Reverse Taper Preparation Methods on the Internal Fit of CAD/CAM Monolithic Zirconia Crowns (An In-vitro study)