Evaluation of margin and internal fit of full arch metal coping fabricated using computer aided milling, direct laser sintering, and traditional casting technique

Evaluation of Internal Fit and Marginal Adaptation of 3D printed Versus CAD/CAM milled provisional anterior crowns (In-Vitro Study)

Marginal Fit of PMMA CAD/CAM Crowns Fabricated by using Photogrammetry Scanning method. (an invitro study)

Evaluation of Marginal and Internal Fit of Provisional Restoration Fabricated by Two Different Scanning Techniques

Comparison of Marginal and Internal Fit of Copings Fabricated from Polyetheretherketone and Zirconia: An in-vitro study

Effect of Two Fabrication Techniques (CAD/CAM and 3D Printing) on The Internal Fit, Marginal Adaptation and Fracture Resistance of Multiple Fused Provisional Restorations: An In-

Internal fit and marginal adaptation of CAD/CAM lithium disilicate endocrowns fabricated with conventional impression and digital scanning protocols. An in-vitro study

In Vitro Investigation of Marginal & Internal Adaptation of Two Screw-Retained Implant Supported Crowns: A Comparative Analysis of Direct Optical & Subtractive Reverse Engineerin

Marginal adaptation related to margin design of CAD/CAM ceramic crowns

Marginal and internal gaps evaluation of endocrown restoration fabricated of different CAD/CAM materials using CBCT: An In vitro study