Fracture Resistance of Implant Supported Three Units Fixed Partial Dentures Fabricated from Zirconia and PEEK “In-vitro study”

Fracture Resistance and Finite Element Analysis of Single-piece PEEK Implant Restorative System Versus Titanium Single-piece Implant Restorative System: In-vitro Study

Effect of Connector Designs on Flexural Strength of Gradient Versus Translucent Monolithic Zirconia Fixed Dental prosthesis, An in Vitro Study.

Evaluation of Marginal Accuracy of PEEK Vs. Lithium Disilicate Single Crowns Constructed By Two Fabrication Techniques: CAD/CAM And Heat Press (In-Vitro Study)

Effect of Zirconia, PEEK, and CFR-PEEK frameworks versus Titanium on stress distribution of All-on-four implant mandibular restorations. A 3D Finite element analysis.

Comparison of Strain Development of Implant Supported Three Units Fixed Partial Dentures Fabricated from Zirconia and PEEK “In-vitro study”

Biofilm adhesion and surface roughness of PEEK VS Monolithic Zirconium: Comparative “An In-Vitro Study”

Influence of design and material on load bearing capacity of fixed dental prosthesis ; A finite element analysis

Evaluation of Fracture Strength and Surface Topography of Interim Prosthodontics Fabricated Using 3D Printing Compared to CAD/CAM Systems (In-Vitro Study)

The Effect of Two Body Wear on CAD/CAM PEEK against Monolithic Zirconia, Lithium Disilicate, and Tooth Enamel; “An in vitro study”