In the present work, the friction coefficient (μ) between bare foot and foot wearing
socks sliding on insoles to facilitate the proper selection of the insole materials. In
order to avoid car accidents, it is necessary that the value of friction coefficient
between the surfaces of foot skin and insoles should be enough high to prevent foot
slip on the braking pedal pad. When the foot slides on the insole to a certain distance
for people wearing slipper, the risk of car accident is arising. Two types of natural
leather and four types of polymeric insoles, used in manufacturing of shoes and
slippers, were tested to determine friction coefficient between bare foot and the tested
insoles
The experiments revealed that μ decreased with increasing the normal load displayed.
The sliding of bare foot against natural leather (I, II) insole showed relatively higher
values than foot wearing sock. In addition, polymeric insole (III) experienced
relatively higher μ compared to that observed for the natural leather. While insole
(IV), bare foot displayed higher μ than foot wearing sock. As for insoles (V and VI)
of rougher surfaces, significant increase in μ was observed compared to the insoles of
smooth surfaces, where the values of μ can be considered quite good to guarantee to
limit slip. Finally, it is proposed to roughen the insole surface to increase μ values.