Linear attenuation coefficient of normal weight concrete containing nanoparticles have been simulated using Monte Carlo transport code MCNP5 to evaluate their shielding performance. The outcomes of numerical simulations were compared to the experimental samples computed with Cesium 137 (0.662 MeV) and XCOM program results. Three different nanoparticles, manly nano silica (NS), nano ceramic (NC), and nano metakaolin (NMK), and their hybridization were used in this research. Slump test, density, water absorption, compressive strength and tensile strength were investigated. Moreover, the scanning electron microscopy technique (SEM), X ray diffraction analysis (XRD) were used to prove the improvement in the microstructure of concrete as a result of the using of NS, NC, NMK, and their hybridization. The results in the present study indicate that the inclusion of single nanomaterials as a replacement of cement improves the mechanical, physical, properties and linear attenuation coefficient of concrete, while the results of the hybrid nano inclusion showed a slight improvement of the properties of concrete. Also, the results of simulation linear attenuation coefficient using Mont carlo was in good agreement with the experimental and XCOM program results.