Beta
160922

Forced Convection Heat Transfer from a Flat Plate at Different Locations between Plates Array.

Article

Last updated: 22 Jan 2023

Subjects

-

Tags

Mechanical Power Engineering

Abstract

A forced convection heat transfer experiment was conducted to study the heat transfer from hot rectangular flat plate ( 155 x 115mm ) to an air stream. The hot plate was situated between unheated plates array at various locations in the flow direction. The study was mainly concerned with the effect of the plate location on the average film coefficient of the transfer. An experimental test rig was designed and constructed for this investigation. The experiments covered the plate locations of x= 12.5, 22.5, 32.
5, 42.5 and 62.5mm, and extended over a range of Revonolds number from about 6,680 to 107, 170. A correlation between the average Nusselt number, the Reynodls number and the hot plate dimensionless location (X) was deduced. The experiments were performed for the case of uniform heat flux. A comparison with the available work in the literature review was also made.

DOI

10.21608/bfemu.2021.160922

Authors

First Name

Mohamed

Last Name

Shalaby

MiddleName

Ali Ibrahim

Affiliation

Mechanical Power Engineering Department., Faculty of Engineering., El-Mansoura University., Mansoura., Egypt.

Email

-

City

Mansoura

Orcid

-

Volume

20

Article Issue

1

Related Issue

23470

Issue Date

1995-03-01

Receive Date

1996-01-11

Publish Date

2021-03-01

Page Start

156

Page End

168

Print ISSN

1110-0923

Online ISSN

2735-4202

Link

https://bfemu.journals.ekb.eg/article_160922.html

Detail API

https://bfemu.journals.ekb.eg/service?article_code=160922

Order

18

Type

Research Studies

Type Code

1,205

Publication Type

Journal

Publication Title

MEJ. Mansoura Engineering Journal

Publication Link

https://bfemu.journals.ekb.eg/

MainTitle

-

Details

Type

Article

Created At

22 Jan 2023