Experimental Study of the Surface Roughness and the Delamination in the Drilling of GFRP and AL/SiCp Composites with Different End Mills - Egyptian Knowledge Bank - troweb

66252

Experimental Study of the Surface Roughness and the Delamination in the Drilling of GFRP and AL/SiCp Composites with Different End Mills

Article

Last updated: 04 Jan 2025

Overview Similar Items

Article

An Experimental Study of the Surface Roughness and Delamination Damage after Drilling Fiber Reinforced Polymeric Composites

Article

Assessment of the Surface Roughness and the Delamination in Drilling Hole of Al/SiCp MMCs

Article

A study of surface roughness and material removal rate for optimal parametric combination in turning of GFRP composites

Article

Analyzing the surface roughness for GFRPs drilled Hole when using different tools and different methodology (A review)

Article

Experimental investigation of glass fiber-reinforced polymer composites during slot milling

Article

DELAMINATION IN DRILLING GFR-THERMOSET COMPOSITES

Article

Prediction of the Surface Roughness for Milling of GFRP Composites Using R.S.M. and ANN

Article

On the influence of Machining parameters on the surface characteristics and material removal rate of Epoxy/Bn Nanocomposites

Article

MODEL DEVELOPMENT FOR SURFACE ROUGHNESS PREDICTION OF AL 1050/SiCp MMCs MACHINED PARTS

Article

Experimental Investigation of Generated Surface Roughness in Hard Turning of Ti6Al4V Using Coated Ceramic and CBN Inserts